Call For Pricing
Cut floor truss components with the FWA 500. Cut components at 60 per min. External Cut-Off Saw allows cutting random length and reprocessing Cut-Offs. The Adjustable Lumber Feeding Magazine allows the sawyer to load up to 8 random length pieces at a time which allows rapid re-load. Each piece is held firmly in place during the initial trimming and the final cutting process. Safety features include Stop Cable and E-Stops to stop the cut-off blade in approximately three seconds. Available Soon.
Features:
Cut floor truss components with the FWA 500. Cut components at 60 per min. External Cut-Off Saw allows cutting random length and reprocessing Cut-Offs. The Adjustable Lumber Feeding Magazine allows the sawyer to load up to 8 random length pieces at a time which allows rapid re-load. Each piece is held firmly in place during the initial trimming and the final cutting process. Safety features include Stop Cable and E-Stops to stop the cut-off blade in approximately three seconds. Available Soon.
Features:
- Powered Angulation
- Electric Digital Readout
- Mechanical Scales
- Adjustable 90 Degrees Cut-Off Saw
- Blade Brakes on all 5 Saw Blades
- Adjustable Lumber Feeding Magazine
- Heavy Duty Conveyor *80 Chain
- OSHA Compliant Safety Guards
- Dust Containment Curtains
- Dust Hoods
- Emergency Stop Cable Across Rear
- Emergency Stops & Bump Bar on Front
- Full Length Vibrating Waste Conveyor
- Heavy Duty Frame (3 x 6 x 1/2")
- Cuts 3x2, 4x2, & 6x2 Lumber
- Standard Cutting Capacity 4.5 ft.
- Feed Conveyor: Feed Rate 0-60 Boards per min.
- Minimum Length Cuts
- Square Edge Blocks: 7 inches
- Floor Truss Webs: 13 1/2 inches
- Saw Blade Angulation
- Motorized angulation of each pair of blades by a linear actuator allows the sawyer to reset each pair of motor angles. Single cuts are made by adjusting the blades toward or away from the centerline rotation.
- Controls UL® & cUL® Approved
- 460 VAC 3 Phase (60 amp) 60 Hertz
Options Available: