For More Information, please contact:
Machinery Sales, Inc.
PO Box 11397 / 3219 N. 2nd St.
Minneapolis, MN 55411
FREE: (800) 344-3433 (EIDE)
Phone: (612) 521-9193 / Fax:
New Machine Sales & Inquiry
Screw Bridge handles the precise demands of automated fastening.
This unit is designed for the utmost efficiency and accuracy, built from
quality materials and backed by more than 30 years experience within the
Now each and every
fastening screw can be driven straight and precisely countersunk, using 2
x 4 or 2 x 6 material and ½" or 5/8" fastening material.
The Screw Bridge offers one-man, push button
operation and can be integrated into your present automated production
choice for material fastening.
PUSH BUTTON CONTROLS
Separate on/off switches are sued to turn off screw guns that are
not required. Each gun operates only after contact with material, to
eliminate continuous running and to reduce energy costs.
POSITIVE LOCK AUTOMATIC BRAKE
Push button control automatically activates the air brake,
locking bridge into place for complete tool cycle. Positive lock
will not allow bridge or tools to stray from position.
PARTS AND MAINTENANCE
All components of the bridge are precision machined for longer
life, reliable accuracy and the finest quality available. Solid
steel tool bar provides a rigid straight line with each screw gun
individually mounted on adjustable castings. The bridge requires
only periodic lubrication and adjustments, as stated in the maintenance
manual. Oil cups and grease fittings are located for easy
accessibility. Screw guns are quickly detachable to reduce
NO WASTED ACTION
Each screw gun is individually stroked to compensate for
material differences. Automatic sensors turn each tool on after
contact is made. Each screw is driven straight, and precisely
Air release valves are muffled to reduce noise during
operation. Flow control mufflers help cushion cylinder action to
extend machinery life.
ELECTRICAL OVER AIR SYSTEM
Allows for more precise control over moving parts. Also
provides for easier trouble-shooting, improved energy efficiency and
reduced need for clean air. Simple adjustment of air regulator
assures correct pressure to the bridge and all air activated components.
BRIDGE CRANK ADJUSTMENT
Hand crank system allow for quick positioning of bridge.
Adjustable pointer rod aligns bridge with studs and seams to guarantee
fast, accurate placement of screws.
- Electrical required 5 Amp
@ 120 volt per tool
- Standard hook up 230 V W/N
10 to 30 Amps
- Air required 1 CFM @ 40 PSI, 16
gallon air reservoir with ASME safety poppet valve
- Screw pattern Standard is
10" on center. Virtually any pattern down to 3" on
center is available
- Width 9' Standard, Up to 16'
- Material Thickness 2 x 4 or 2 x
- 2 x 2 to 2 x 12 optional
- ½' or 5/8" sheeting
- Shipping Weight 2150