For cutting lumber, non-ferrous metals, plastics & composites

 

SPECIFICATIONS
Model 612
Model 1012
Table Height 36" 36"
Table Top 34" x 49" 34" x 49"
Arbor Motor 15 HP 1800 RPM TEFC 230/460/60/3 15 HP 1800 RPM TEFC 230/460/60/3
Electrical Magnetic Starter with 110 Volt at Push Button in NEMA 1 Enclosure Magnetic Starter with 110 Volt at Push Button in NEMA 1 Enclosure
Air Equipment

3" x 8" Stroke Cylinder Filter, Regulator & Lubricator

Single Palm Switch-Air Operated

3" x 8" Stroke Cylinder Filter, Regulator & Lubricator

Single Palm Switch-Air Operated

Saw Arbor

1-1/4" Stress-proof steel w/6" Saw Collars

1800 RPM, Timken Bearings, Vee Belt Drive

1-1/4" Stress-proof steel w/6" Saw Collars

1350 RPM, Timken Bearings, Vee Belt Drive

Saw Blade 24" Diameter, 1-1/4" Bore 32" Diameter, 1-1/4" Bore
Cut Capacity

6" Thick x 12" Wide Fence Forward

2" Thick x 20" Wide Fence Rearward

10" Thick x 12" Wide Fence Forward

3" Thick x 24" Wide Fence Rearward

Operating Speed 5-15 CPM-Adj. via Flow Controls 5-10 CPM-Adj. via Flow Controls
Sawdust Outlet 4" Diameter, Rear Exit, 400 CFM 3" Diameter, Rear Exit, 400 CFM
Shipping Weight 1000 lbs. (1250 lbs. export 105 cu. ft.) 44" x 55" x 74" 1200 lbs. (1450 lbs. export 115 cu. ft.) 44" x 55" s 80"
 


For More Information, please contact:

Eide Machinery Sales, Inc.
PO Box 11397 / 3219 N. 2nd St.
Minneapolis, MN 55411

TOLL FREE: (800) 344-3433 (EIDE)
Phone: (612) 521-9193 / Fax: (612) 521-9307 
Email: New Machine Sales & Inquiry

 

 
 
EXTRAS
  • Two palm control-anti tie down
  • NEMA 12 Electrics with fusible disconnect
  • Infeed roller table 10' long
  • Outfeed graduated stop bar with four stops 8' long
  • Additional stops
  • Air over oil feed for non ferrous cutting
  • Lennox lube coolant system for blade, pump type, two nozzles
  • Pressure Switch on upper guard cylinder - replaces mechanical switch
  • 24" Blade 80 tth 10 degree hook ATB 1-1/4" Bore
  • 32" Blade 60 tth 10 degree hook ATB 1-1/4" Bore
  • Special Voltages & Hz
  • Custom Roller Conveyors