For More Information,
Machinery Sales, Inc.
PO Box 11397 / 3219 N. 2nd St.
Minneapolis, MN 55411
TOLL FREE: (800) 344-3433 (EIDE)
Phone: (612) 521-9193 / Fax: (612)
Email: New Machine Sales
Triad's header and
trimmer component nailing machine is the professional's choice. This
component machine is designed for the utmost in efficiency. Built
from sound engineering with quality materials and backed by more than 40
years of experience within the housing industry.
Designed to speed output while using less manpower, you save valuable time
This state-of-the-art machine operates by foot pedal control, clamping and
squaring material prior to nailing. Each tool can be selected to
nail material from 2 x 3 to 2 x 12. Give yourself the edge and let
Triad's years of field proven reliability go to work for you.
Separate on/off switches are used to turn off the nailing tools that are
not required. The guns activate only after contact with material has
FOOT PEDAL CONTROL
The foot pedal activates the side clamp first to square up the
component, and with a split second's delay clamps down the tools and clamp
release allowing the operator to position the component for the second
The side clamp is easily adjustable for various size material by
moving the cylinder to the various holes provided. The side clamping
cylinder creates up to 800 lbs. Of pressure for straightening culled
The squaring stop is used to square up your component prior to
driving the first nail. Once nailed it's flipped out of the way so
the component can be rolled through for further nailing. The stop is
located conveniently in front of the operator.
OFF SET TOOLS
The nailing tools are off set for nailing wider dimensional lumber
to prevent splitting of the material. The solid steel tool bar
provides a rigid, straight line with each nailing tool mounted on
QUICK MOUNTING BRACKETS
The nailing tools are mounted with Triad's exclusive mount blocks
for quick detachment of tools if need be. Also, quick disconnects
are used on all air lines and special trigger activating system.
Flow control mufflers help to extend machine life and reduce sound.
ADJUSTABLE TOOL SPACING
Triad's special tool mounts are adjustable for nail placement.
Simply loosen the bolts and slide the mounts to the desired nail spacing.
Cast against steel creates a natural bushing eliminating costly wear and
assuring longer machine life and quality. Just one more reason to
go with TRIAD.
- Electrical: 120V/SP 3 AMP
- Air: 100 PSI @ 3 CFM
- Color: Tan
- Weight: Approx. 860 lbs.
- Height: 7'
- Depth: 4'
- Length: 11' with 10' of
- Tools: Customer to
designate name brand and type
- Capacity: From 2 x 3 to 2 x 12
material up to 6"